copper and brass bar, 1-200 mm, round / hex / square bar, C11000 / H62 / H65. Cut to length, EN 10204 3.1 MTC.
Theoretical weight for stainless steel (7,930 kg/m³). Actual weight depends on grade and mill tolerance.
Product Parameter UNS C24000 low brass is an alloy mainly consisting of copper and zinc. Brass alloys can be easily shaped and are available in various colors. Common sizes of Round Copper Bar: PRODUCT DESCRIPTION: Low Brass 80% TEMPERS: H01 Quarter Hard, H02 Half Hard, H04 Hard SOLIDS: 3/8" to 2 1/2" O.D. HEX: 3/8" to 2" O.D. STANDARD LENGTHS: 144" The specific size options may vary depend on you. Common Processing of Copper Alloy: Blanking Drawing Etching Forming and Bending Heading and Upsetting Piercing and Punching Roll Threading and Knurling shearing Spinning Squeezing and Swaging Stamping Equivalent materials to UNS C24000 copper alloy are: ASTM B134 ASTM B36 QQ W321 SAE J461 SAE J463 Also Supply Wide Range of Round/Square/Hex Shaped Brass Bars. Chemical Composition
| Element | Content (%) |
|---|---|
| Cu | 80 |
| Zn | 20 |
| Product Name | Copper bar |
|---|---|
| Material | C10100,C10200,C10300,C10400C10930,C11000,C11300,C11400C12500,C14200,C14420,C14500C21000,C23000,C26000,C27000C44300,C44400,C44500,C60800C71000,C71500,C71520,C71640,etc |
| Standard | ASTM B152, B187, B133, B301, B196, B441, B465, JISH3250-2006, GB/T4423-2007,etc |
| Length | 5.8m, 6m,or as required |
| Package | Standard export seaworthy package or as required.Export Wooden Pallets, Plastic Film,(Ship By Sea) |
| Price term | FOB,CNF,CFR,CIF,Ex-Work,etc.L/C , D/A , D/P , T/T , West Union , Money Gram , Other |
| ASTM / AISI | EN | JIS | GB | Typical use |
|---|---|---|---|---|
| 304 / S30400 | 1.4301 | SUS 304 | 06Cr19Ni10 | General fabrication, kitchenware, food equipment |
| 304L / S30403 | 1.4307 | SUS 304L | 022Cr19Ni10 | Welded assemblies, low-carbon requirement |
| 316L / S31603 | 1.4404 | SUS 316L | 022Cr17Ni12Mo2 | Marine, chemical, coastal architecture |
| 321 / S32100 | 1.4541 | SUS 321 | 06Cr18Ni11Ti | High-temperature service up to 800 °C |
| 430 / S43000 | 1.4016 | SUS 430 | 10Cr17 | Indoor appliances, automotive trim |
| 201 / S20100 | 1.4372 | SUS 201 | 12Cr17Mn6Ni5N | Cost-sensitive indoor applications |
| 2205 / S32205 | 1.4462 | SUS 329J3L | 022Cr23Ni5Mo3N | Duplex: high strength, chloride resistance |
| Grade | Tensile strength | Yield strength (0.2%) | Elongation | Hardness |
|---|---|---|---|---|
| 304 | ≥ 515 MPa | ≥ 205 MPa | ≥ 40% | ≤ 201 HBW |
| 316L | ≥ 485 MPa | ≥ 170 MPa | ≥ 40% | ≤ 217 HBW |
| 430 | ≥ 450 MPa | ≥ 205 MPa | ≥ 22% | ≤ 183 HBW |
| Item | Range | Tolerance |
|---|---|---|
| Thickness | 0.1 – 200 mm | ±0.02 mm (cold rolled) / ±0.3 mm (hot rolled) |
| Width | 1000 / 1219 / 1250 / 1500 mm | ±1 mm, or cut to size |
| Length | up to 6000 mm | ±3 mm |
| Flatness | — | ≤ 3 mm / m |
Need a tighter tolerance or a non-standard size? Send your drawing and we will confirm feasibility before quoting.
| Form | Thickness / OD | Width / Length | Typical finish | Standard |
|---|---|---|---|---|
| Sheet & plate | 0.3 – 200 mm | 1000 / 1219 / 1250 / 1500 × 2438 / 3000 / 6000 mm | 2B, BA, No.4, HL, 8K | ASTM A240, EN 10088 |
| Coil & strip | 0.3 – 3.0 mm | slit 20 – 1500 mm, ID 508 mm | 2B, BA | ASTM A240 |
| Pipe & tube | OD 6 – 630 mm | wall 0.5 – 30 mm, length 6 m | Annealed, pickled | ASTM A312 / A554 |
| Bar, angle & channel | 3 – 500 mm | round / flat / square / hex, 6 m | Bright, peeled, ground | ASTM A276 |
| Aluminum | 0.3 – 200 mm | 1000 – 1500 mm wide | Mill, brushed, anodized | ASTM B209 |
| Copper & brass | 0.5 – 100 mm | bar / rod / tube | Bright, mill | ASTM B187 |
Looking at a different form? Tell us the finished part and we will suggest the closest stock or processing route.
Yes. Send us a size list or drawing and we will cut, slit, bend or drill to your tolerance and quote the processed price.
We can ship from one tonne for stock items. Mixed containers with other sizes and grades are welcome.
Every shipment is supplied with an EN 10204 3.1 mill test certificate listing chemical composition and mechanical properties.
Steel prices change with the market. Send your specification through the form below and we will quote the current price within 8 working hours.
Before You Order
Five decisions cover most orders. If any of them is unclear, send us the drawing or the application and we will narrow it down.
Related Products
Round/Square/Hex Brass Copper Bars Stock
copper and brass bar, 1-200 mm, round / hex / square bar, C11000 / H62 / H65. Cut to length, EN 10204 3.1 MTC.
Get price
JIS C1220 Solid Bare Copper Round Bar
copper and brass bar, 1-200 mm, round / hex / square bar, C11000 / H62 / H65. Cut to length, EN 10204 3.1 MTC.
Get price
Hot Sale C11300 Red Pure Copper Bar
copper and brass bar, 1-200 mm, round / hex / square bar, C11000 / H62 / H65. Cut to length, EN 10204 3.1 MTC.
Get price
H85 230 Solid Brass Copper Bars for Sale
copper and brass bar, 1-200 mm, round / hex / square bar, C11000 / H62 / H65. Cut to length, EN 10204 3.1 MTC.
Get price
H65 H68 H70 Yellow Brass Copper Solid Round Bar Stock
H65 copper and brass bar, 1-200 mm, round / hex / square bar, C11000 / H62 / H65. Cut to length, EN 10204 3.1 MTC.
Get price
H63 ASTM C27200 Yellow Brass Copper Bar Rod
copper and brass bar, 1-200 mm, round / hex / square bar, C11000 / H62 / H65. Cut to length, EN 10204 3.1 MTC.
Get price
H62 ASTM C28000 Copper Alloy Bar Rod
H62 copper and brass bar, 1-200 mm, round / hex / square bar, C11000 / H62 / H65. Cut to length, EN 10204 3.1 MTC.
Get price
Extruded H70 UNS C26000 Cartridge Brass Rod
C26000 copper and brass bar, 1-200 mm, round / hex / square bar, C11000 / H62 / H65. Cut to length, EN 10204 3.1 MTC.
Get price
Get In Touch
Whether you need 500 kg of 304 sheet or 25 tonnes of 316L coil, we can quote it. Tell us the grade, size, surface, quantity and destination port; our engineers reply within 8 working hours with price, lead time and packing details.
Fields marked * are required. We reply within 8 working hours (GMT+8).
